|
Post by stewart on Feb 18, 2008 18:34:23 GMT -5
im parting out my pacer make offers list of items fenders hood glass interior and any thing else you need located in plainville IN
|
|
|
Post by dja56208 on Feb 20, 2008 23:59:52 GMT -5
Interested in purchasing the following:
- vertical and horizontal bumper strips - front and rear bumpers (vinyl/rubber bumper protection strips) - any accessories (dash clock, tach., rear hatch cover, etc.) - body side moldings (doesn't look like there are any on car) - left/right front turn signal/running light lens in good condition.
Please e-mail direct at r20696@hotmail.com or danayers@cableone.net.
Thanks,
Dan
|
|
|
Post by dalemixon on Feb 21, 2008 17:44:38 GMT -5
if the rear light assy dont have a crack in them i would like to purchase them,,,,, dale mixon@aol.com
|
|
|
Post by PacerBoy on Feb 21, 2008 18:41:09 GMT -5
I'm looking for a good usable carbuerator for my pacer. 6cyl. 2 bbl. I want one to just drop in and drive without rebuilding and such. email: jb76pacerx@yahoo.com
|
|
|
Post by cadipacer on Feb 21, 2008 19:08:13 GMT -5
If and when you get all the stuff sold or removed,, Id like to buy the front end,, complete,, or the shell of the car to get the front-end.. I'm in Louisville KY....
|
|
|
Post by flaketheflyer on Feb 24, 2008 22:59:02 GMT -5
hi, looking for good-condition drivers side door panel for my 76 sedan. let me know if in decent shape, thanks flake@accesscable.net
|
|
|
Post by stewart on Feb 26, 2008 19:00:08 GMT -5
i will check onall items listed as wanted have all the stripping and grill for it what would be the best wat to take off the bumper stripping will start pulling parts when its not snowing sorry im not been on much not selling doors or shell all lights are not cracked
|
|
|
Post by dalemixon on Feb 28, 2008 15:31:23 GMT -5
since inquring last i located lenses 150 miles away.with a little work they look perfect. if lenses and base are perfect they are worth 50.00 each. the problem is when they are unscrewed from base assy the screws are rusted and the lenses break upon removable.i went through 6 tail lighht assys to get 2 good ones.thanks, dale mixon
|
|
|
Post by deadlyfugu on Mar 17, 2008 2:38:48 GMT -5
I am interested in the rear bumper if there are no holes or rust maybe a little, and driver side window regulator or entire door. I am in terre haute indiana and would come to pick up or remove. What is the front floor like? Would be interested in that also.
|
|
|
Post by tonydog on May 16, 2008 11:15:40 GMT -5
looking for all interior panels for my 75 pacer...too cracked from ago to repair thanks tony
|
|
|
Post by skipperman on May 21, 2008 15:34:18 GMT -5
What motor is in it and are ya selling any PARTS off it ....... skip
|
|
|
Post by rebelbob on May 21, 2008 20:27:46 GMT -5
Looking for fuel filler neck for my pacer thanks from REBEL BOB
|
|
|
Post by pulln4dejr on Jun 5, 2008 21:27:28 GMT -5
I'm interested in the L/F inside door handle and the tag light assembly if still available.
|
|
|
Post by dja56208 on Jun 8, 2008 23:09:45 GMT -5
Stewart,
I looking for the following parts: - vertical bumper guards....both pair from front and back bumpers - clock accessory...if it has one. Specifically I need the cable & connection to the fuse box ....I have a clock, but don't know if it works etc. - any accessories the car may have.....specifically looking for a floor console brackets, rear cargo area cover - dome light lens...(circular one in excellent condition)
You can contact me direct at r20696@hotmail.com. Thanks
Dan
|
|
|
Post by lamalalu on Jul 14, 2008 12:42:04 GMT -5
Stewart, Do you have the instument cluster with good voltage regulators? Thanks.
|
|