Parting out a 1977 Pacer D/L

[mrwalsh]

I'm parting out a 76 Pacer D/L. I purchased it as a parts car for my other project. That car is done, and this one is out back collecting plants. It's been parked for about six months. I can't bare to scrap the car and was hoping someone else could put these parts to good use. Everything seen in the pictures below is up for grabs. I have most of the chrome, some of it is missing from the pictures, but if your looking for something just ask! I also have a gas tank from a 76 up for grabs. It's from my project car, and is in good shape. Not pictured but also for sale is a set of hubcaps from the 76 as well. Clean on the inside, and minimal surface rust on the outside. Sorry for the sub par photos, but the car is cubbyholed in the corner against a wall. If your looking for something email or reply to this thread. I prefer payment through paypal, but I'm willing to bend on that.


In a few weeks I'm going to start parting this out on ebay. So get on this while the picking is good.


Email me if your interested at [e-mail]





Heres a picture of the other side the car taken before it was parked.



email me at [e-mail]

Heres the a link to my ebay profile if anyone is interested. feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=hllywalsh&ftab=AllFeedback

[recap113]

Wondering what your location is?

[mrwalsh]

The car is located in Naples (SW), Florida.

[mrwalsh]

Just updating on what has been sold. So far I've sold the passenger side view mirror, the AC/Heater unit and the two pieces of chrome around the license plate. I've also had some interest in the fender chrome, and nerf strips. Everything else is still available! So ask away. Save these parts from the crusher! I attached a photo of the hubcaps I'm selling. The gas tank is still available as well as the roofrack.

[current1]

Hi,

I'm looking for the "wood grain" dash piece to the right of the instrument cluster where the radio and clock are. I need the light color "burl" wood.

Thanks,

Jerry

[77basecoupe]

What kind of shape is the trim in the hatch area in?