|
Post by slyrose on May 7, 2005 16:09:52 GMT -5
Hello All,
I need a Vacuum fitting for my new power brakes! I need the vac fitting on the intake manifold, just below the carb. Anyone know where I can get one?
I also need a harness and plug for my N/S switch. It is an auto w/258, on a 77.
Thanks!
|
|
LLBUX
Junior Member
Posts: 76
|
Post by LLBUX on May 7, 2005 18:34:27 GMT -5
I have an extra manifold or two. I'll check and see if I can help you with the fitting.
You'd be surprised, Autozone may have the N/S switch you need.
Good luck!
|
|
|
Post by cadipacer on May 9, 2005 12:34:42 GMT -5
Yes,, Return- Zone should have n-s switch, and the harness is basic for amc,, most any 70's amc w/ 727 , 904, 998,, has the same wiring arranment on N-S....
|
|
LLBUX
Junior Member
Posts: 76
|
Post by LLBUX on May 10, 2005 10:53:03 GMT -5
I believe I have the fitting you need. It is on a 2 barrel intake.
Got a pic of the exact part you need?
I'll try to post a pic later today of what I have available.
You can email me at: GMWAGONMAN@HOTMAIL.COM to exchange info.
Good luck!
|
|